EasiSolvä 51 Stencil Remover is a liquid, ready-to-use stencil remover/degreaser. This product was developed for use where pre-mixing with water is not practical. EasiSolvä 51 quickly and effectively dissolves all direct emulsions, direct/indirect stencils as well as capillary films. Available in 55 gallon drums only.

· EasiSolvä 51 is pre-mixed and ready to use . . . no pre-mixing is necessary.

· EasiSolvä 51 is biodegradable with water.

· EasiSolvä 51 contains additives which degrease the mesh at the same time it removes the stencil. No degreasing step is necessary.

· EasiSolvä 51 is an aggressive stencil stripper which is active on most all film and direct emulsions.

· EasiSolvä 51 is very economical to use.

· Remove ink from screen with an EasiSolv Screen Wash and high pressure rinse.

· Simply apply EasiSolvä 51 Stencil Remover to both sides of screen with a sprayer, Easi-Spray air driven pump, or by hand.

· Pressure rinse mesh from both sides of the screen, starting at the top.

· Flood rinse the frame and mesh from the top with water. The screen will be clean and ready for re-use. No degreasing is necessary.

· EasiSolvä 51 Stencil Remover may be used with a pump, brush, Easi Spray air driven system, air charged sprayer or manually.