KiwoCol | PolyPlus | PolyCol | CleanLine | BlockOut | Hardeners | KiwoBond | Pregan | Sundries | Emulsion Selection Chart

Kiwo Ink Wash and Haze Remover Activator

Description

KIWO INK WASH AND HAZE REMOVER ACTIVATOR is a low odor solvent mixture for the removal of most screen printing inks. It is designed for manually cleaning screens prior to reclaiming. If screens are to be stored after cleaning, the remaining residue of the solvent must be washed off with water or KIWO INK REMOVER. It can also be used as activator in combination with KIWO HAZE REMOVER.

Before decoating the screen, remove all ink with a scraper or spatula. Rub both sides of the screen with a rag soaked in KIWO INK WASH until all ink residue is completely dissolved or emulsified, until the emulsion becomes clearly visible, then rinse well with water.

Should any ink residue remain on the screen, pour KIWO INK WASH AND HAZE REMOVER ACTIVATOR onto the screen and brush the screen every few minutes until the residue is dissolved. Remove the residue with a rag and rinse well with water. The cleaning power can also be enhanced by adding KIWO BOOSTER to the solvent mixture. (See KIWO BOOSTER data sheet.)

KIWO INK WASH AND HAZE REMOVER ACTIVATOR has a very low evaporation rate and may attack the frame adhesive if the screen is not rinsed with water after cleaning. Keep the soaking time as short as possible and if necessary, use a protective lacquer, such as ESTELAN AR to protect the adhesive.

In combination with KIWO HAZE REMOVER, use this product to redissolve the completely dried HAZE REMOVER on the screen by rubbing the screen with a rag or brush soaked in KIWO INK WASH AND HAZE REMOVER ACTIVATOR. Then rinse the screen with running water and remove the dissolved and emulsified haze with a high pressure washer. (See KIWO HAZE REMOVER data sheet).

Color: colorless
Consistency: Liquid
Shelflife: 1 year at 68º Fahrenheit
(20º Celsius)
Flash point: 200º Fahrenheit (93º Celsius)
TLV: none
VOC: 7.38 lbs/gal, 923 g/liter
Vapor Pressure: < 0.1 mm/Hg at 20º C
HMIS rating: Health - 1
Flammability - 1
Reactivity - 0

Do not breathe fumes. All working areas should be well ventilated. Avoid contact with eyes and skin. It is recommended to wear protective glasses and gloves. See Material Safety Data Sheet for additional information.

Kiwo Ink Wash And Haze Remover Activator can be eliminated through biological decomposition in adapted waste water treatment plants. The working solution (rinsed residue from the screen) can generally be emptied into the drains. Consult local authorities for local regulations.

1 quart, 1 gallon, 5 gallon, 55 gallon drums

For additional product information, please visit www.kiwo.com or call PCS at (919) 266-4463.

Thank you for choosing KIWO.

Version 8/98