KiwoCol | PolyPlus | PolyCol | CleanLine | BlockOut | Hardeners | KiwoBond | Pregan | Sundries | Emulsion Selection Chart

Pregasol F

1. Description

PREGASOL F is a ready to use emulsion reclaimer liquid for decoating of polymer-based direct emulsions and capillary films such as Diazo- and SBQ-sensitized emulsions.

Apply the PREGASOL F solution with a soft, clean brush evenly on both sides of the wet screen after the screen has been carefully cleaned of ink residue. Rub the screen gently with a brush to dissolve the emulsion.

After approximately 2 minutes, rinse thoroughly with a strong water spray. A high pressure water spray (1000 - 2000 psi, 40 - 60 bar) may be required for highly water resistant emulsions. Prolonged reaction times are possible and may help in the decoating process.

Ensure that the PREGASOL F solution does not dry on the screen. This can lead to a hardening of the emulsion and the resulting emulsion residues will be extremely difficult to remove.

Color: Green
Consistency: Liquid
Shelflife: 1 year at 68°
Flash point: Not applicable
TLV: Not applicable
VOC: None
pH value: >5
HMIS rating: Health - 1
Flammability - 0
Reactivity - 0

It is recommended to wear protective glasses and gloves. See Material Safety Data Sheet for additional information.

Pregasol F can be eliminated through biological decomposition in adapted waste water treatment plants. The working solution can generally be emptied into the drains. Consult local authorities for local regulations.

1 quart, 1 gallon, 5 gallon containers

For additional product information, please visit www.kiwo.com or call PCS at (919) 266-4463.

Version 8/98